CONSISTENT PERFORMANCE
From simple shapes to fine details, increase productivity and part consistency with Solidium MDF ... more
You can’t control your application environment, but you can choose a product that works as hard as you do to protect the end result. Solidium MR from Del-Tin Fiber is an interior, moisture-resistant panel engineered to deliver the machinability you expect from MDF – plus improved dimensional stability and reduced thickness swell when exposed to wetness. Formulated for use in a variety of applications where moisture or high humidity is a real concern, Solidium MR is ideal for sink bases and cabinetry, dishwasher enclosures, and other residential uses. It’s also well-suited for table tops, cabinets and fixtures in schools, healthcare and industrial facilities, offering added protection against unwanted moisture penetration. Solidium MR helps ensure a little moisture won’t put a damper on all of your hard work.
Physical Properties
| GENERAL | DIMENSIONS | ||
| Usage: | Interior use only | Thicknesses: | 3/16" - 1" |
| Raw Material: | Southern Pine fiber | Widths: | To five feet |
| Lengths: | To sixteen feet |
| PERFORMANCE VALUES | ||||
| PROPERTY | THICKNESS RANGE | |||
| Minimum Panel Averages | <3/8" | >3/8" to <1/2" | 1/2" to 3/4" | >3/4" |
| IB - Internal Bond (psi) | 110 | 100 | 90 | 85 |
| MOR - Modulus of Rupture (psi) | 4,050 | 4,050 | 4,050 | 4,050 |
| MOE - Modulus of Elasticity (ppsi) | 405 | 405 | 405 | 405 |
| Face Screw Hold (lbs) | NA | NA | 270 | 270 |
| Edge Screw Hold (lbs) | NA | NA | 250 | 250 |
| Thickness Swell (max) | .044" | 10% | 7% | 4% |
| TOLERANCES | |
| Length & Width: (for each panel) | ± 1/16" |
| Squareness: (per 1 ft. of length) | ± 1/64" |
| Straightness: (per 2 ft. of length) | ± 1/64" |
| Thickness: (within panel) | ± 0.005" |
| Thickness: (panel to panel) | ± 0.005" |
Environmental
EMISSIONS
The Composite Panel Association (CPA) has certified the El Dorado, Arkansas, manufacturing facility of Del-Tin Fiber, LLC to be in compliance with the requirements of CPA ECC 4-11 for Eco-Certified Composites and the California Air Resources Board(CARB) Airborne Toxic Control Measure 93120.
Solidium MR exceeds the standards for CARB Phase 2 compliance.
ECC Certification Standard
In addition, the Composite Panel Association has certified that Del-Tin Fiber, LLC has fulfilled the requirements of CPA ECC 4-11 for Eco-Certified Composites by demonstrating compliance to these four environmental criteria.
- Carbon Footprint – required each panel to demonstrate net carbon storage
- Local and Renewable Resource – requires high percentage use of local fiber
- Recycled/Recovered – requires high percentage use of recycled/recovered fiber
- Sustainability – requires low percentage of fiber furnish to enter waste stream
Review greater detail of the ECC standard and a link to the Del-Tin Fiber, LLC certificate on our ECC certification page.
ENVIRONMENTAL CREDITS
Solidium MR can also contribute toward credits in popular environmental certification programs such as LEED, Green Globes, NAHB and CARB. Visit our green contributions page for more information.
manufacturer of Solidium MDF